![]() Also, if one of the signals is too weak then it's quite easy for the other to heavily interfere. Check if your area isn't overloaded with different 2.4Ghz WiFi networks and Bluetooth devices. Although they should auto adjust to prevent interference, sometimes it just happens. Multiple users have confirmed they have no latency issues even with 4 controllers connected with cheap, generic $5 adapters from Aliexpress Bluetooth and WiFi interferenceīoth use the same frequency. Keep in mind that when the term "bad" is used it does not necessarily mean "cheap". Not using the correct/updated BT adapter's driver.Too many devices connected to the adapter.High radio interference near the adapter.Low quality Bluetooth adapters (most integrated ones).For this reason, messing with DS4Windows' related drivers will probably be a waste of time. If you are having latency issues then installing/uninstalling drivers won't fix them unless they are directly related to your dongle's driver. In case you are having issues with input delay, keep something in mind: DS4Windows itself is probably not the cause of whatever high input latency/latency spikes that you may have! 98% chance of the issue being elsewhere.Ĭontrollers do not communicate directly with DS4Windows via some driver, they connect to the default Windows' Bluetooth Stack and DS4Windows just receives and sends data to it through the channels given by Windows. If you have a DualShock 3, DualShock 4 or DualSense you can enable the Flash Lighbar at High latency option in the Settings tab, which will make the lightbar flash in a red color when latency spikes are detected.įor the DualShock 3 you need to have DsHidMini's Lightbar to LED translation enabled, then latency spikes will cause all 4 LEDs to quickly flash.If the controller's latency goes over 10ms then it will appear on the Log.You can check the current input delay by hovering your mouse above the controllers name on the Controllers tab (check the image above).V1 and v2 don't have major latency differencesġ6ms is the lowest latency the official controller can achieve No major technical experiments were done to obtain these values besides checking what DS4Windows usually informs when those controllers are used at maximum BT polling rate ControllerĬonnected through BthPS3 + DsHidMini (DS4Windows Mode) Headphone or mic related issues when using supported gamepads ![]() "Could not open (controller) exclusively" / Hide DS4 controllers option not working Games not recognizing the virtual controller (under construction)Ĭontroller not behaving correctly in-game Virtual controller usage in games and related issuesĭS4Windows not creating virtual controllers Settings Windows' Power Plan to High PerformanceĬonnect USB BT adapter through a USB extension cableĭecrease the BT polling rate on profile settings Ways to check if a controller has been detected by WindowsĭS4Windows causing controller to increase data transfer rate Physical controller detection, connection and related issues Troubleshooting tips and general directionsĭS4Windows silently does not open, crashes, does not start or fails to save settings Running DS4Windows under a custom ".exe" name Preventing conflicts between Steam and DS4Windows Uninstalling DS4Windows and related drivers Preventing the double controller / double input issue in gamesīacking up, restoring or deleting user data and settings HidHide is the better option all around for those who can use it.Starting point, general info and directionsĬonnecting controllers to the PC and DS4Windows Random non-obvious process having a hold of the gamepadĮven if it works initially, if your gamepad disconnects in the middle of a game chances are that you’ll lose exclusive access upon reconnection, requiring you to close the game to try again.įor the reasons explained above, the Hide DS4 Controllers option is NOT RECOMMENDED, though it remains available to users that need to use it for whatever reason.Nvidia Geforce experience process having a hold of the gamepad.Google chrome/Opera is running (why does it have a connection to the gamepad you ask? A mystery).Common reasons for this request to fail are: ![]() The problem with this method is that Windows can deny the exclusive access request when another process already has a open connection to the gamepad. When enabled, DS4Windows will kindly ask Windows for exclusive access to detected devices, meaning the later would only allow DS4Windows to detect the gamepads and preventing the double input issue. This option exists on DS4Windows’ Settings tab.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |